The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Este artigo propõe um método de projeto de rede de estabilização de impedância (ISN) que pode medir perturbações em portas de telecomunicações balanceadas de múltiplos pares para transmissão de sinais analógicos e digitais. O método de projeto proposto para ISN é estudado com base no circuito equivalente de ISN e nos requisitos para ISN. Os parâmetros para projeto de ISNs de até 100 fios são estudados e determinados. Um ISN para portas de sinal de 4 fios é construído com base no método de projeto proposto, e as características do ISN são examinadas experimentalmente. Os resultados mostram que o ISN satisfaz os requisitos do ISN. Além disso, o desvio de medição está dentro de 1dB em comparação com outros ISN, e a perturbação medida pelo ISN mostra uma boa correlação com aquela medida por uma sonda de corrente.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copiar
Fujio AMEMIYA, Nobuo KUWABARA, "Design Method of Impedance Stabilization Networks for Measuring Disturbances at Balanced Multiple-Pair Telecommunication Ports" in IEICE TRANSACTIONS on Communications,
vol. E83-B, no. 4, pp. 754-762, April 2000, doi: .
Abstract: This paper proposes a design method of impedance stabilization network (ISN) which can measure disturbance at balanced multiple-pair telecommunication ports for both analog and digital signal transmission. The proposed design method of ISN is studied on the basis of the equivalent circuit of ISN and the requirements for ISN. The parameters for designing of ISNs up to 100-wires are studied and determined. An ISN for 4-wire signal ports is constructed on the basis of the proposed design method, and the characteristics of the ISN are experimentally examined. The results show the ISN satisfies the requirements for ISN. Furthermore, the measurement deviation is within 1dB compared with other ISN, and the disturbance measured by the ISN shows a good correlation with that measured by a current probe.
URL: https://global.ieice.org/en_transactions/communications/10.1587/e83-b_4_754/_p
Copiar
@ARTICLE{e83-b_4_754,
author={Fujio AMEMIYA, Nobuo KUWABARA, },
journal={IEICE TRANSACTIONS on Communications},
title={Design Method of Impedance Stabilization Networks for Measuring Disturbances at Balanced Multiple-Pair Telecommunication Ports},
year={2000},
volume={E83-B},
number={4},
pages={754-762},
abstract={This paper proposes a design method of impedance stabilization network (ISN) which can measure disturbance at balanced multiple-pair telecommunication ports for both analog and digital signal transmission. The proposed design method of ISN is studied on the basis of the equivalent circuit of ISN and the requirements for ISN. The parameters for designing of ISNs up to 100-wires are studied and determined. An ISN for 4-wire signal ports is constructed on the basis of the proposed design method, and the characteristics of the ISN are experimentally examined. The results show the ISN satisfies the requirements for ISN. Furthermore, the measurement deviation is within 1dB compared with other ISN, and the disturbance measured by the ISN shows a good correlation with that measured by a current probe.},
keywords={},
doi={},
ISSN={},
month={April},}
Copiar
TY - JOUR
TI - Design Method of Impedance Stabilization Networks for Measuring Disturbances at Balanced Multiple-Pair Telecommunication Ports
T2 - IEICE TRANSACTIONS on Communications
SP - 754
EP - 762
AU - Fujio AMEMIYA
AU - Nobuo KUWABARA
PY - 2000
DO -
JO - IEICE TRANSACTIONS on Communications
SN -
VL - E83-B
IS - 4
JA - IEICE TRANSACTIONS on Communications
Y1 - April 2000
AB - This paper proposes a design method of impedance stabilization network (ISN) which can measure disturbance at balanced multiple-pair telecommunication ports for both analog and digital signal transmission. The proposed design method of ISN is studied on the basis of the equivalent circuit of ISN and the requirements for ISN. The parameters for designing of ISNs up to 100-wires are studied and determined. An ISN for 4-wire signal ports is constructed on the basis of the proposed design method, and the characteristics of the ISN are experimentally examined. The results show the ISN satisfies the requirements for ISN. Furthermore, the measurement deviation is within 1dB compared with other ISN, and the disturbance measured by the ISN shows a good correlation with that measured by a current probe.
ER -