The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Exibições de texto completo
87
Este artigo propõe o processo de fabricação de um absorvedor eletromagnético (EM) piramidal feito de borracha natural. A vantagem desta pesquisa é gerar látex de valor agregado a partir da borracha tailandesa e reduzir o número de absorventes químicos usando absorventes à base de borracha natural. O absorvedor proposto na pesquisa é feito principalmente de látex com enchimento de negro de fumo. O absorvedor proposto está na forma de espuma de borracha que apresenta características adequadas para servir como absorvedor EM. Os resultados desta pesquisa são fórmulas químicas para fabricação de espuma de borracha piramidal com carga de negro de fumo. O custo de fabricação é muito baixo quando comparado a um absorvedor comercial disponível. As propriedades elétricas do absorvedor EM proposto são medidas. Além disso, a refletividade é medida e bem comparada com um absorvedor EM comercial.
Kiadtisak SALAYONG
King Mongkut's University of Technology North Bangkok
Titipong LERTWIRIYAPRAPA
King Mongkut's University of Technology North Bangkok
Kittisak PHAEBUA
King Mongkut's University of Technology North Bangkok
Prayoot AKKARAEKTHALIN
King Mongkut's University of Technology North Bangkok
Hsi-Tseng CHOU
National Taiwan University
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copiar
Kiadtisak SALAYONG, Titipong LERTWIRIYAPRAPA, Kittisak PHAEBUA, Prayoot AKKARAEKTHALIN, Hsi-Tseng CHOU, "Electromagnetic Absorber Made by Natural Rubber" in IEICE TRANSACTIONS on Communications,
vol. E102-B, no. 2, pp. 189-196, February 2019, doi: 10.1587/transcom.2018ISI0002.
Abstract: This paper proposes fabrication process of a pyramidal electromagnetic (EM) absorber made by natural rubber. The advantage of this research is to generate value-added latex from Thai rubber and to reduce number of chemical absorber by using natural rubber based absorber. The proposed absorber in the research is mainly made from latex with carbon black filler. The proposed absorber is in the form of rubber foam which provides suitable characteristics to serve as an EM absorber. The results of this research are chemical formulas for fabrication of pyramidal rubber foam with carbon black filler. The fabrication cost is very low when compared to an available commercial absorber. The electrical properties of the proposed EM absorber are measured. Also the reflectivity is measured and compared well with a commercial EM absorber.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.2018ISI0002/_p
Copiar
@ARTICLE{e102-b_2_189,
author={Kiadtisak SALAYONG, Titipong LERTWIRIYAPRAPA, Kittisak PHAEBUA, Prayoot AKKARAEKTHALIN, Hsi-Tseng CHOU, },
journal={IEICE TRANSACTIONS on Communications},
title={Electromagnetic Absorber Made by Natural Rubber},
year={2019},
volume={E102-B},
number={2},
pages={189-196},
abstract={This paper proposes fabrication process of a pyramidal electromagnetic (EM) absorber made by natural rubber. The advantage of this research is to generate value-added latex from Thai rubber and to reduce number of chemical absorber by using natural rubber based absorber. The proposed absorber in the research is mainly made from latex with carbon black filler. The proposed absorber is in the form of rubber foam which provides suitable characteristics to serve as an EM absorber. The results of this research are chemical formulas for fabrication of pyramidal rubber foam with carbon black filler. The fabrication cost is very low when compared to an available commercial absorber. The electrical properties of the proposed EM absorber are measured. Also the reflectivity is measured and compared well with a commercial EM absorber.},
keywords={},
doi={10.1587/transcom.2018ISI0002},
ISSN={1745-1345},
month={February},}
Copiar
TY - JOUR
TI - Electromagnetic Absorber Made by Natural Rubber
T2 - IEICE TRANSACTIONS on Communications
SP - 189
EP - 196
AU - Kiadtisak SALAYONG
AU - Titipong LERTWIRIYAPRAPA
AU - Kittisak PHAEBUA
AU - Prayoot AKKARAEKTHALIN
AU - Hsi-Tseng CHOU
PY - 2019
DO - 10.1587/transcom.2018ISI0002
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E102-B
IS - 2
JA - IEICE TRANSACTIONS on Communications
Y1 - February 2019
AB - This paper proposes fabrication process of a pyramidal electromagnetic (EM) absorber made by natural rubber. The advantage of this research is to generate value-added latex from Thai rubber and to reduce number of chemical absorber by using natural rubber based absorber. The proposed absorber in the research is mainly made from latex with carbon black filler. The proposed absorber is in the form of rubber foam which provides suitable characteristics to serve as an EM absorber. The results of this research are chemical formulas for fabrication of pyramidal rubber foam with carbon black filler. The fabrication cost is very low when compared to an available commercial absorber. The electrical properties of the proposed EM absorber are measured. Also the reflectivity is measured and compared well with a commercial EM absorber.
ER -