The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
A maioria das redes sem fio são especificadas como usando o protocolo de enlace de dados, ou seja, camada 2 (L2). Recentemente, a IoT e o processamento de big data promoveram o uso de redes de sensores sem fio para conectar e enviar dados para aplicações de data center pela Internet. Para isso, foi proposta a implementação de uma pilha IP no nó sem fio, ou gateway da rede IP e sem fio L2. Ambas as abordagens foram desenvolvidas para permitir que aplicações na rede IP acessem nós da rede sem fio L2. Entretanto, como as redes de sensores sem fio não requerem nenhum protocolo de rede, um IP não é essencial para a coleta de dados. Portanto, propomos uma nova VPN de ponte para conectar redes sem fio, na qual a aplicação e os nós finais sem fio não são obrigados a reconhecer um endereço IP ou protocolo de rede. Desta forma, a rede IP serve apenas para transportar os quadros de enlace de dados das redes sem fio. Acreditamos que este é outro estilo de IoT e recomendamos que esta VPN seja usada como uma plataforma de teste para pequenas empresas e instituições de IoT antes de começarem a implementar uma pilha IP em seus sistemas.
Hiroaki HATA
NTT Com Engineering
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copiar
Hiroaki HATA, "A MAC Address Routing VPN Architecture for Connecting Non-IP Wireless Sensor Networks to Data Centers" in IEICE TRANSACTIONS on Communications,
vol. E102-B, no. 4, pp. 690-698, April 2019, doi: 10.1587/transcom.2018SEP0004.
Abstract: Most wireless networks are specified as using the data link protocol, i.e. layer 2 (L2). Recently, IoT and big data processing have promoted the use of wireless sensor networks to connect and send data to data center applications over the Internet. To do so, the implementation of an IP stack on the wireless node, or the gateway of the IP and wireless L2 network, has been proposed. Both approaches were developed to allow applications on the IP network to access L2 wireless network nodes. However, since wireless sensor networks do not require any network protocol, an IP is not essential for collecting data. Therefore, we propose a novel bridging VPN for connecting wireless networks, in which the application and wireless end nodes are not required to acknowledge an IP address or network protocol. In this way, the IP network merely serves to transport the data link frames of wireless networks. We believe that this is another style of IoT and recommend that this VPN be used as a test bed for small IoT businesses and institutions before they start to implement an IP stack on their systems.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.2018SEP0004/_p
Copiar
@ARTICLE{e102-b_4_690,
author={Hiroaki HATA, },
journal={IEICE TRANSACTIONS on Communications},
title={A MAC Address Routing VPN Architecture for Connecting Non-IP Wireless Sensor Networks to Data Centers},
year={2019},
volume={E102-B},
number={4},
pages={690-698},
abstract={Most wireless networks are specified as using the data link protocol, i.e. layer 2 (L2). Recently, IoT and big data processing have promoted the use of wireless sensor networks to connect and send data to data center applications over the Internet. To do so, the implementation of an IP stack on the wireless node, or the gateway of the IP and wireless L2 network, has been proposed. Both approaches were developed to allow applications on the IP network to access L2 wireless network nodes. However, since wireless sensor networks do not require any network protocol, an IP is not essential for collecting data. Therefore, we propose a novel bridging VPN for connecting wireless networks, in which the application and wireless end nodes are not required to acknowledge an IP address or network protocol. In this way, the IP network merely serves to transport the data link frames of wireless networks. We believe that this is another style of IoT and recommend that this VPN be used as a test bed for small IoT businesses and institutions before they start to implement an IP stack on their systems.},
keywords={},
doi={10.1587/transcom.2018SEP0004},
ISSN={1745-1345},
month={April},}
Copiar
TY - JOUR
TI - A MAC Address Routing VPN Architecture for Connecting Non-IP Wireless Sensor Networks to Data Centers
T2 - IEICE TRANSACTIONS on Communications
SP - 690
EP - 698
AU - Hiroaki HATA
PY - 2019
DO - 10.1587/transcom.2018SEP0004
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E102-B
IS - 4
JA - IEICE TRANSACTIONS on Communications
Y1 - April 2019
AB - Most wireless networks are specified as using the data link protocol, i.e. layer 2 (L2). Recently, IoT and big data processing have promoted the use of wireless sensor networks to connect and send data to data center applications over the Internet. To do so, the implementation of an IP stack on the wireless node, or the gateway of the IP and wireless L2 network, has been proposed. Both approaches were developed to allow applications on the IP network to access L2 wireless network nodes. However, since wireless sensor networks do not require any network protocol, an IP is not essential for collecting data. Therefore, we propose a novel bridging VPN for connecting wireless networks, in which the application and wireless end nodes are not required to acknowledge an IP address or network protocol. In this way, the IP network merely serves to transport the data link frames of wireless networks. We believe that this is another style of IoT and recommend that this VPN be used as a test bed for small IoT businesses and institutions before they start to implement an IP stack on their systems.
ER -