The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Peças de alinhamento de plástico precisas com ranhura em V para conectar matrizes de fibra óptica monomodo a dispositivos ópticos multiportas foram moldadas com sucesso com uma resina termofixa usando uma técnica de moldagem por injeção altamente produtiva. As peças moldadas são dois tipos de blocos com ranhura em V que são compatíveis com o tamanho de dispositivos ópticos com oito ou doze portas ópticas. Sua precisão dimensional deve ser melhor que 1 µm em todo o comprimento das ranhuras em V para um acoplamento óptico eficiente. Este requisito rigoroso foi satisfeito usando ferramentas de moldagem processadas com precisão com uma resina especialmente escolhida sob condições ideais de moldagem. A viabilidade das peças de alinhamento óptico foi assegurada por uma avaliação de suas características de perda e confiabilidade no acoplamento de fibras monomodo a 1
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copiar
Michiyuki AMANO, Yasuaki TAMURA, Fumiaki HANAWA, Hirotsugu SATO, Norio TAKATO, Shun-ichi TOHNO, "Precisely Molded Plastic V-Grooved Alignment Parts for Multi-Port Optical Devices" in IEICE TRANSACTIONS on Electronics,
vol. E82-C, no. 8, pp. 1525-1530, August 1999, doi: .
Abstract: Precise plastic V-grooved alignment parts for connecting single-mode optical fiber arrays to multi-port optical devices were successfully molded with a thermosetting resin by using a highly productive injection molding technique. The molded parts are two types of V-grooved blocks that are compatible with the size of optical devices having eight or twelve optical ports. Their dimensional accuracy must be better than 1 µm over the whole length of the V-grooves for efficient optical coupling. This strict requirement was satisfied using precisely processed molding tools with a specially chosen resin under optimum molding conditions. The feasibility of the optical alignment parts was assured by an evaluation of their loss characteristics and reliability in coupling single-mode fibers to 1
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e82-c_8_1525/_p
Copiar
@ARTICLE{e82-c_8_1525,
author={Michiyuki AMANO, Yasuaki TAMURA, Fumiaki HANAWA, Hirotsugu SATO, Norio TAKATO, Shun-ichi TOHNO, },
journal={IEICE TRANSACTIONS on Electronics},
title={Precisely Molded Plastic V-Grooved Alignment Parts for Multi-Port Optical Devices},
year={1999},
volume={E82-C},
number={8},
pages={1525-1530},
abstract={Precise plastic V-grooved alignment parts for connecting single-mode optical fiber arrays to multi-port optical devices were successfully molded with a thermosetting resin by using a highly productive injection molding technique. The molded parts are two types of V-grooved blocks that are compatible with the size of optical devices having eight or twelve optical ports. Their dimensional accuracy must be better than 1 µm over the whole length of the V-grooves for efficient optical coupling. This strict requirement was satisfied using precisely processed molding tools with a specially chosen resin under optimum molding conditions. The feasibility of the optical alignment parts was assured by an evaluation of their loss characteristics and reliability in coupling single-mode fibers to 1
keywords={},
doi={},
ISSN={},
month={August},}
Copiar
TY - JOUR
TI - Precisely Molded Plastic V-Grooved Alignment Parts for Multi-Port Optical Devices
T2 - IEICE TRANSACTIONS on Electronics
SP - 1525
EP - 1530
AU - Michiyuki AMANO
AU - Yasuaki TAMURA
AU - Fumiaki HANAWA
AU - Hirotsugu SATO
AU - Norio TAKATO
AU - Shun-ichi TOHNO
PY - 1999
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E82-C
IS - 8
JA - IEICE TRANSACTIONS on Electronics
Y1 - August 1999
AB - Precise plastic V-grooved alignment parts for connecting single-mode optical fiber arrays to multi-port optical devices were successfully molded with a thermosetting resin by using a highly productive injection molding technique. The molded parts are two types of V-grooved blocks that are compatible with the size of optical devices having eight or twelve optical ports. Their dimensional accuracy must be better than 1 µm over the whole length of the V-grooves for efficient optical coupling. This strict requirement was satisfied using precisely processed molding tools with a specially chosen resin under optimum molding conditions. The feasibility of the optical alignment parts was assured by an evaluation of their loss characteristics and reliability in coupling single-mode fibers to 1
ER -