The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. ex. Some numerals are expressed as "XNUMX".
Copyrights notice
The original paper is in English. Non-English content has been machine-translated and may contain typographical errors or mistranslations. Copyrights notice
Houve um rápido avanço na multiplexação por divisão de comprimento de onda (WDM) e na multiplexação por divisão de tempo de alta taxa de bits (TDM) como técnicas para lidar com a crescente demanda por capacidade de transmissão. No passado, essa expansão de capacidade foi alcançada por WDM de 2.5 Gbit/s e 10 Gbit/s usando a banda C (cerca de 1550 nm), mas a pesquisa na banda L de 1600 nm (cerca de 1600 nm) ainda é sendo intensificado para obter maior expansão. Com a conquista de velocidades de 40 Gbit/s, que marcam o limite do processamento de sinais elétricos, o TDM óptico, com velocidades de 100 Gbit/s, está entrando em uso. Neste tipo de transmissão WDM de alta densidade e alta taxa de bits, a ocorrência de fenômenos não lineares dentro das fibras ópticas reduz a qualidade da transmissão, e isso aumenta a importância da tecnologia para suprimir a não linearidade e, especificamente, no caso da transmissão WDM sistemas, de mistura de quatro ondas (FWM). Obviamente existe também o problema da distorção do sinal devido à dispersão, de modo que a tecnologia para suprimir a dispersão cumulativa também é essencial. Há também necessidade de linhas de transmissão com gerenciamento sofisticado de dispersão em uma ampla faixa de comprimentos de onda, e que possam ser constituídas por novas fibras.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copiar
Yoshihisa SUZUKI, Kazunori MUKASA, Ryuichi SUGIZAKI, Kunio KOKURA, "Dispersion Managed Optical Transmission Lines and Fibers" in IEICE TRANSACTIONS on Electronics,
vol. E83-C, no. 6, pp. 789-798, June 2000, doi: .
Abstract: There has been a rapid advance in wavelength-division multiplexing (WDM) and high bit-rate time-division multiplexing (TDM) as techniques for coping with burgeoning demand for transmission capacity. In the past this expansion of capacity has been achieved by 2.5-Gbit/s and 10-Gbit/s WDM using the C-band (around 1550 nm), but research on the 1600-nm L-band (around 1600 nm) is being stepped up to obtain further expansion. With the achievement of 40-Gbit/s speeds, which mark the limit of electrical signal processing, optical TDM, with speeds of 100 Gbit/s, is coming into use. In this kind of high-density, high bit-rate WDM transmission, the occurrence of non-linear phenomena within optical fibers reduces transmission quality, and this raises the importance of technology for suppressing non-linearity and specifically, in the case of WDM transmission systems, of four-wave mixing (FWM). Obviously there is also the problem of signal distortion due to dispersion, so that technology for suppressing cumulative dispersion is also essential. There is also a need for transmission lines with sophisticated dispersion management over a wide band of wavelengths, and it may be consisted of novel fibers.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e83-c_6_789/_p
Copiar
@ARTICLE{e83-c_6_789,
author={Yoshihisa SUZUKI, Kazunori MUKASA, Ryuichi SUGIZAKI, Kunio KOKURA, },
journal={IEICE TRANSACTIONS on Electronics},
title={Dispersion Managed Optical Transmission Lines and Fibers},
year={2000},
volume={E83-C},
number={6},
pages={789-798},
abstract={There has been a rapid advance in wavelength-division multiplexing (WDM) and high bit-rate time-division multiplexing (TDM) as techniques for coping with burgeoning demand for transmission capacity. In the past this expansion of capacity has been achieved by 2.5-Gbit/s and 10-Gbit/s WDM using the C-band (around 1550 nm), but research on the 1600-nm L-band (around 1600 nm) is being stepped up to obtain further expansion. With the achievement of 40-Gbit/s speeds, which mark the limit of electrical signal processing, optical TDM, with speeds of 100 Gbit/s, is coming into use. In this kind of high-density, high bit-rate WDM transmission, the occurrence of non-linear phenomena within optical fibers reduces transmission quality, and this raises the importance of technology for suppressing non-linearity and specifically, in the case of WDM transmission systems, of four-wave mixing (FWM). Obviously there is also the problem of signal distortion due to dispersion, so that technology for suppressing cumulative dispersion is also essential. There is also a need for transmission lines with sophisticated dispersion management over a wide band of wavelengths, and it may be consisted of novel fibers.},
keywords={},
doi={},
ISSN={},
month={June},}
Copiar
TY - JOUR
TI - Dispersion Managed Optical Transmission Lines and Fibers
T2 - IEICE TRANSACTIONS on Electronics
SP - 789
EP - 798
AU - Yoshihisa SUZUKI
AU - Kazunori MUKASA
AU - Ryuichi SUGIZAKI
AU - Kunio KOKURA
PY - 2000
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E83-C
IS - 6
JA - IEICE TRANSACTIONS on Electronics
Y1 - June 2000
AB - There has been a rapid advance in wavelength-division multiplexing (WDM) and high bit-rate time-division multiplexing (TDM) as techniques for coping with burgeoning demand for transmission capacity. In the past this expansion of capacity has been achieved by 2.5-Gbit/s and 10-Gbit/s WDM using the C-band (around 1550 nm), but research on the 1600-nm L-band (around 1600 nm) is being stepped up to obtain further expansion. With the achievement of 40-Gbit/s speeds, which mark the limit of electrical signal processing, optical TDM, with speeds of 100 Gbit/s, is coming into use. In this kind of high-density, high bit-rate WDM transmission, the occurrence of non-linear phenomena within optical fibers reduces transmission quality, and this raises the importance of technology for suppressing non-linearity and specifically, in the case of WDM transmission systems, of four-wave mixing (FWM). Obviously there is also the problem of signal distortion due to dispersion, so that technology for suppressing cumulative dispersion is also essential. There is also a need for transmission lines with sophisticated dispersion management over a wide band of wavelengths, and it may be consisted of novel fibers.
ER -